NAB Show Update – Quick thoughts – Blackmagic Design unveil a host of products!

Blackmagic Design (BMD) are a revolutionary company. They are always pushing the boundaries of conventional technologies. A NAB Show 2015 they unveiled a bunch of new products that further this reputation of theirs.

Lets begin with the smallest- the Micro Cinema Camera

Smallest only in name and in form factor, this camera packs a punch. This is one of the most exciting product releases if you consider all the filming possibilities with this camera.

BMMCCImage courtesy Blackmagic Design Website

This is a robust professional-grade action camera made from magnesium with a Micro Four Thirds lens mount.

From the looks of it, its built solidly and is very customizable. It takes bits of technology from many different manufacturers to build one complete unit.

It features a Super 16mm sensor, which is approximately about a third smaller than a conventional Micro Four Thirds sensor. This sensor is still significantly  larger than other comparable action cameras on the market. More over, it offers interchangeable lenses, a very welcome addition to this segment.

It can output Raw video or Apple ProRes with a claimed 13-stops of dynamic range.

Interestingly the camera offers the ability of using  both a rolling and a global shutter. This is a very welcome feature as the global shutter helps in eliminating the “jello effect” commonly found when using a rolling shutter for fast action shots in cameras like this. However recording is limited to 1080p 30fps when using the global shutter; when using the rolling shutter though, shooters can capture 1080p 60fps in 12-bit Raw or ProRes.

The camera is a bit weighted,  at 300 grams if you compare it to other offerings by Contour, Sony, GoPro etc.

BMD however claim  that it is still light enough to take flight in a DJI Phantom 2 drone.

The camera runs of Canon’s LP-E6 battery, which is very commonly found on most Pro level DSLRs. This is a nice move considering its a very robust battery and most pro users already have plenty of devices (not just DSLRs) that run on these batteries.

Blackmagic have eschewed from their previous design features such as the touch screen LCD and have instead gone with button controls on this camera. There are only 6 such buttons for record start-stop, playback, rewind, forward, menu and the on and off switch. These are conveniently sandwiched between the lens mount ant the Rec tally light.

Located on the same side is an HDMI output (very convenient) and  a port labelled “Expansion” . This port can be used for a number of things, such as wirelessly controlling the camera or linking to a wireless video transmitter.  Read more about the expansion port, and its possibilities here.

Conveniently located on the other side of the lens mount is an SDXC and SDHC compatible card slot  and a 3.5mm audio input is need be. The unit can be used as a regular camera if need be with the help of the appropriate rig.The unit sports standard 1/4″ thread mounts on the top and bottom of the camera body for mounting. This is an excellent unit considering the purpose for which it is built, action and sports use, and to be used on drones, rigs, dollies and jibs.
The Blackmagic Micro Cinema Camera is available now and has an international price of US$ 995/- (no word on India pricing yet).

Moving on to the next major announcement – The URSA Mini

This announcement from BMD created the most buzz. The URSA Mini, is  a compact and lightweight Super 35 digital camera meant for handheld and over the shoulder use. It features features a new 4.6K image sensor that also announced . This sensor is available for upgrade for the full size URSA too.

The camera features, switchable global or rolling shutter, and claims to have up to 15 stops of dynamic range, can record RAW and Apple ProRes to CFast 2.0 card in two record slots.

The URSA Mini is available in 4 customizations of either EF or PL lens mounts and 4K or 4.6K image sensors. It is to be noted that the 4k sensor has a claimed dynamic range of 12 stops.

BMD are positioning this camera as for “one man band” shooters and for crews with a smaller foot print with its “over the shoulder” design and form factor. BMD is also supplying and optional shoulder Kit, which features a quick release mounting plate so that it is easier to shift from handheld to shoulder or to a tripod use quickly. Blackmagic also released the URSA Viewfinder, which makes the URSA Mini perfect for run and gun shooting situations. The view finder does not come supplied with the camera.

The  viewfinder is high spec-ed and features a high resolution 1920 x 1080 color OLED display and glass based optics. This is a very welcome step!

The Camera is expected to be available in July starting from US$2,995 for the URSA Mini 4K EFmount, US$3,495 for the URSA Mini 4K PL mount, US$4,995 and for the URSA Mini 4.6K EF mount and US$5,495 for the URSA Mini 4.6K PL mount models.

Another nifty piece of equipment that was announced was the  – Blackmagic Video Assist

It is a portable, all in one professional monitor and video recorder that can be used with any camera outputting clean signals over SDI or HDMI.

It is a small and compact device featuring a full HD 1920×1080 5inch monitor screen for recording and monitoring. The screen is a touchscreen and has an over lay UI.

Shooters can record broadcast quality 10-bit 4:2:2 video onto SD cards in Apple ProRes and Avid DNxHD  formats.

The Video Assist runs on a standard Canon LP-E6 battery and features 2 slots for allowing allowing swapping of dead batteries while in use.

More over it has on board down conversion, and would probably be the monitor of choice for the Micro Cinema Camera. All in all a very very high quality monitor-recorder combo.

Priced at US $495/- and soon to be available in July, its a compelling product considering all its features.

Blackmagic also released a major upgrade to its color grading and editing software- DaVinci Resolve

BMD gave its biggest ever upgrade to the hugely popular Resolve software.  Version 12 now has  over 80 new features for professional editing and color grading.

“Over the years, we have worked hard to build in improvements in each release,” Blackmagic founder and CEO Grant Petty said in an email announcement to customers delivered before NAB opened. “This year, I feel we have added more new features to DaVinci Resolve than we have in the last five years combined.”

Blackmagic are now pushing it as a major Pro Non Liner Editing platform, and rightly so. The update includes a new modern interface, multi-cam editing, new media management tools, a new professional audio engine , shot matching, 3D keying, new 3D perspective tracker and enhanced curve editing.

DaVinci resolve lite remains a free download, the software version with stereoscopic workflow, real-time power mastering capabilities, and  GPU-accelerated noise-reduction capabilities, is priced at Us$995/-


3 thoughts on “NAB Show Update – Quick thoughts – Blackmagic Design unveil a host of products!

  1. The micro cinema camera sounds like an interesting concept! And that Video looks pretty tasty! for all those times that you don’t need 4k! I’d love this on my 5d! well not just 5d but all cams that i use!

    I’m not so sure about the URSA Mini. Firstly no ND’s and 2nd BMD always get their measurement of their DR wrong. It would be interesting to see if this thing actually has 15 stops.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s